Followers

Monday, March 27, 2017

My Guest Designer Project for Fernli Designs

Welcome to my 2nd project for Fernli Designs...I was delighted to be asked to complete 3 projects as their Guest Designer for March.
As you know my first project was the Atc Box & Atcs, which you can see HERE

For this project I have altered Fernli's 4 Drawer Chest....it arrives flat packed, but is very easy to assemble...I used Pinflair book glue for the drawers for extra bonding, but you can use the glue of your choice


After assembling the unit and allowing the glue to dry, I gave it a light coat of burnt umber acrylic paint and then added designs in texture paste on the tops,sides and also the front of the drawers..I left the centre front of the drawers clear for the handles.


I set the unit aside for the texture paste to dry...in the meantime I selected all the elements I wanted to use to decorate the  unit and aged them using Rusty Patina and Gilding wax.


Once everything was dry on the unit I gave it 2 coats of Burnt Umber acrylic paint and then highlighted the textured areas using and Gilding wax and then dabbed Rusty Patina randomly over the whole unit...I also painted the inside of the drawers with Terracotta coloured acrylic paint.


At this stage I had been let down with the hardware for the unit..so as I had a deadline to meet, I had to source items from my stash and adapt them....these too were treated to the Rusty Patina and Gilding Wax.


I assembled the chest and starting on the right hand side I added the elements that I had prepared earlier....


Below is the left hand side.


Here is the top....


I added the ball feet to the chest and the handles to the drawers...not exactly what I wanted for the handles, but when folk let you down you have to adapt.
Below I have added a few more images....there are slight colour differences between some of the photos, the weather had been so bad for a few days it was hard getting a good light.



As you can see this chest is just perfect for all my Fernli Embellishments.





I do hope you have enjoyed this blog post..many thanks to all of you that dropped by and left a comment...
I will be back shortly with my 3rd and final project.


5 comments:

Valerie-Jael said...

Wonderful project! Hugs, Valerie

Unknown said...

This is awesome, I love it :))

Lozzy said...

wow stunning Sandie...Hugs Lozzy xx

Mandy Twitchen said...

Amazing, I absolutely love it x

Jo Williams Independent Stampin' Up Demonstrator said...

What a wonderful project! You did a great job with this, even having to make do with what you had for your drawer pulls and stuff, you did great! I love the overall finished design.
Check out my blog as I host always anything goes challenges each week! Have a wonderful day!
Hugs,
Jo
♥ Jo's Scrap Shack ♥